Click here to view the live testing feed.
In what seems to be a genuine concern of the effects of radon emissions in residential homes, a certain website from a non-profit organization out of Houston has made it a point to imply without scientific proof, that natural stone could be a major contributor of radon in a household.
From what may be perceived on the surface as perhaps another “going green” ad campaign, seems to be a different slant on the ongoing battle of the engineered stone manufacturers against natural stone.
You can rad more about that here.
The quickest way to test is with short-term tests. Short-term tests remain in your home for two days to 90 days, depending on the device. “Charcoal canisters,” “alpha track,” “electret ion chamber,” “continuous monitors,” and “charcoal liquid scintillation” detectors are most commonly used for short-term testing. Because radon levels tend to vary from day to day and season to season, a short-term test is less likely than a long-term test to tell you your year-round average radon level. If you need results quickly, however, a short-term test followed by a second short-term test may be used to decide whether to fix your home.
How To Use a Test Kit:
Testing is easy and should only take a few minutes of your time.
Follow the instructions that come with your test kit. If you are doing a short-term test, close your windows and outside doors and keep them closed as much as possible during the test. Heating and air-conditioning system fans that re-circulate air may be operated. Do not operate fans or other machines which bring in air from outside. Fans that are part of a radon-reduction system or small exhaust fans operating only for short periods of time may run during the test. If you are doing a short-term test lasting just 2 or 3 days, be sure to close your windows and outside doors at least 12 hours before beginning the test, too. You should not conduct short-term tests lasting just 2 or 3 days during unusually severe storms or periods of unusually high winds. The test kit should be placed in the lowest lived-in level of the home (for example, the basement if it is frequently used, otherwise the first floor). It should be put in a room that is used regularly (like a living room, playroom, den or bedroom) [B]but not your kitchen or bathroom[/B]. Place the kit at least 20 inches above the floor in a location where it won’t be disturbed - away from drafts, high heat, high humidity, and exterior walls. Leave the kit in place for as long as the package says. Once you’ve finished the test, reseal the package and send it to the lab specified on the package right away for analysis. You should receive your test results within a few weeks.